USB-RS485_ConversionAdapter_ver2_1
USB-RS485 Conversion Adapter Ver. 2.1
About USB-RS485 Conversion Adapter
The USB-RS485 Conversion Adapter converts communications from the USB interface to the RS-485 interface and can drive KONDO B3M series servo motors.
Note that this is Ver. 2.1. For other versions, please refer to the following repositories.
About Ver. 2.1
Ver. 2.1 has a switch and four indicator LEDs to turn the power supply for driving servo motors on and off on the board.
|
|
|
|
PCB preview image
|
Actual PCB
|
After component mounting
|
Repository Contents
- \image
- PCB preview images and capture of design screen
- \libraries
- Libraries used in Autodesk Eagle design
- Schematic.pdf
- Circuit diagram of this product
- BOM.txt
- Parts lists output from design data
- .brd
- Board wiring design file by Autodesk Eagle
- .sch
- Schematic design file by Autodesk Eagle
- Gerber_data.zip
- Zip folder of Gerber format files for PCB manufacturing requests.
- LICENSE
- This is a license to use this product. Please confirm before use.
- .gitignore
- File to exclude cache files from management.
Documentation
BOM
| Eagle Design Parts # | Q'ty | Mfr. Product # | Supplier | Description |
|---|---|---|---|---|
| LED1, LED4 | 2 | 150060VS86000 | Mouser | Standard LEDs - SMD Green 2V 20mA 573nm 0603 |
| LED2, LED3 | 2 | 150060YS75000 | Mouser | Standard LEDs - SMD Yellow 2V 20mA 590nm 0603 |
| FL1 | 1 | BLM18SD220SN1D | Mouser | Ferrite Beads 22 OHM 0603 |
| R1, R3, R4 | 3 | RC0603FR-101KL | Mouser | Thick Film Resistors - SMD 1 kOhms 100-200mW 1% 0603 |
| R2 | 1 | RC0603FR-1310KL | Mouser | Thick Film Resistors - SMD 10 kOhms 100-200mW 1% 0604 |
| R6 | 1 | RC0603FR-10120RL | Mouser | Thick Film Resistors - SMD 120 Ohms 100-200mW 1% 0605 |
| R5, R7 | 2 | RC0603FR-10680RL | Mouser | Thick Film Resistors - SMD 680 Ohms 100-200mW 1% 0606 |
| R8 | 1 | RC0603FR-102KL | Mouser | Thick Film Resistors - SMD 2 kOhms 100-200mW 1% 0607 |
| C1 | 1 | GRM188B11H103KA01 | Akizuki | Multilayer Ceramic Capacitors SMD/SMT 0.01uF 50V 10% 0603 |
| C2, C4 | 2 | GCM188L81H104K57 | Akizuki | Multilayer Ceramic Capacitors SMD/SMT 0.1uF 50V 10% 0603 |
| C3 | 1 | C1608X5R1C475K080AE | Mouser | Multilayer Ceramic Capacitors SMD/SMT 4.7uF 16V 10% 0603 |
| D1, D2 | 2 | CG0603MLC-05E | Mouser | ESD Protectors 5V 0603 |
| CH1 | 1 | XT60PW-M | Suzaku Lab. | DC Power Connector, Through Hole, Horizontal, Male, 30A 500V |
| CH2 | 1 | S4B-XH-A(LF)(SN) | Akizuki | Connector Header Through Hole, Right Angle 4 position 2.5mm |
| USB1 | 1 | MUSB-5B-NE-S175 | Akizuki | Mini USB Connector 5P B type, Female, SMT type, without standoff |
| F1 | 1 | MF-MSMF050-2 | Mouser | PTC Resettable Fuses 15V .5A-HD 100A MAX |
| IC1 | 1 | ADM3078E*1 | Mouser | RS-485/RS-422 Transceiver (Half Duplex, 16 Mbps, DE/RE) |
| IC2 | 1 | FT232RL | Akizuki | USB Interface IC USB to Serial UART |
| S1 | 1 | DS-850K-S-ON | Akizuki | Rocker Switches 125VAC 5A |
PCB Fabrication
PCB(Printed Circuit Board) manufacturing was outsourced to Elecrow.The custom specifications are as follows.
- Layer : 2 layers
- Dimensions : 45 x 45
- Different PCB Design : 1eg
- PCB Thickness : 1.6
- PCB Color : Black
- Surface Finish : HASL
- Castellated Hole : No
- Copper Weight : 1oz
- PCB Stencil : Stencil 10cm X 10cm no frame[Top]
- Eagle design rule : Elecrow Eagle Design Rule
- Eagle CAM file : Elecrow CAM file
- Gerber format data : Gerber_data.zip
Contact
If you have any questions, please contact MasatoKubotera, the product's designer, by E-mail.
E-mail : masatokubotera06@yahoo.co.jp
License Information
This product is open source.
Please review the LICENSE file for license information.
USB-RS485 Conversion Adapter Ver. 2.1 by Masato Kubotera is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.